Velocity Systems Operator Utility Belt

The OUB was designed with a less is more approach. The OUB is narrower than other belts allowing for greater operator mobility while maintaining ample real estate to mount additional pouches and equipment. Its skeletonized insert ensures passive cooling and allows the belt to be at least 25% lighter than other comparable belts.

Features:
-Slotted opening on the sides for using belt-mounted gear like holsters or drop-rigs.
-Contoured shape that fits your lower-back better than other belts.
-Narrow profile and 25% lighter than other utility belts.
-Passive cooling and ventilation.
-Can be worn with your existing riggers belt (inner belt is not included)
-Helmet-style Velcro Hook lined inner portion for securing to inner belts (not required). Velcro type is non-abrasive style used inside helmets.
-Velcro Strap on the inner back portion to secure rear of belt to the rear belt loop on your pants.

Sizing: Measurements below are overall length of OUB belt. Measure your sizing with clothing you will be wearing under the OUB belt (usually at least 1 pants size bigger for most people). Normally you want about 6 inches specing between ends of the belt when wrapped around your waist.

Small: 31-inches – 16 columns of MOLLE/PALS, 4 slotted openings per side

Medium: 34.5-inches – 18 columns of MOLLE/PALS, 5 slotted openings per side

Large: 38.5-inches – 20 columns of MOLLE/PALS, 6 slotted openings per side

Inner belt not included.