Hodge Defense Sale!

Hodge Defense Systems Mod 3 Complete URG – Multiple Calibers (R)

$2,150.00 – $2,349.00

-4%

Hodge Defense Systems is proud to release the Mod3. This design incorporates our traditional Mod2 upper receiver (C405 aluminum) with our S-lock handguard but with a single piece top rail (7075 aluminum) for added rigidity and strength. This provides a significant decrease in rail deflection providing an excellent platform for lasers/passive aiming devices. The top rail is held to the receiver and handguard using stainless-steel screws secured with blue loctite and torqued to between 25-30 inch/lbs. This platform excelled in testing including extensive and excessive drop tests, as well as an aggressive full-auto firing schedule. This design takes our already extremely rugged Mod2 design to the next level.

This particular variant includes a Hodge Defense BCG, Forward Control Design ACF-L charging handle, and A2 Flash Hider (NOT pinned and welded).

See below for Specs on specific caliber and barrel lengths.

NFA DISCLAIMER/WARNING: The 11.5″, 12.5″ and 14.5″ (not Pin and Welded) do not meet the 16″ minimum barrel length requirement, and requires registration and a tax stamp with the Bureau of Alcohol, Tobacco, Firearms and Explosives (BATFE) when assembled into a complete rifle. Additional state and local restrictions may apply. It is the sole responsibility of the buyer to comply with any and all applicable laws.

UPS SHIPPING OPTIONS ONLY. No $7.95 Flat Rate for this item. This is to properly insure it.

Hodge Defense Systems is proud to release the Mod3. This design incorporates our traditional Mod2 upper receiver (C405 aluminum) with our S-lock handguard but with a single piece top rail (7075 aluminum) for added rigidity and strength. This provides a significant decrease in rail deflection providing an excellent platform for lasers/passive aiming devices. The top rail is held to the receiver and handguard using stainless-steel screws secured with blue loctite and torqued to between 25-30 inch/lbs. This platform excelled in testing including extensive and excessive drop tests, as well as an aggressive full-auto firing schedule. This design takes our already extremely rugged Mod2 design to the next level.

This particular variant includes a Hodge Defense BCG, Forward Control Design ACF-L charging handle, and A2 Flash Hider (NOT pinned and welded).

Specs:

Common to All:

-Upper Receiver: Hodge Defense C405 Mod3
-Gas Block: Pinned HDSI
-Top Rail: 7075 aluminum, semi-monolithic
-Barrel Nut: Titanium
-Bolt Carrier Group: Magnesium Phosphate Coated
-Charging Handle: FCD ACF-L ambidextrous
-Forward Assist: Hodge FCD LSFA
-Ejection Port Cover: Magpul
-Individually Test Fired
-Made in USA

12.5 inch, 5.56 NATO Caliber Specific:

-Barrel Material: HDSI Proprietary FN Cold Hammer Forged Steel
-Gas Port: 0.064″ (works with Flow Through Suppressors)
-Gas System: Carbine
-Handguard: 11.5″ 6061 aluminum
-Muzzle Threads: 1/2×28

14.5 inch, 5.56 NATO Caliber Specific:

-Barrel Material: HDSI Proprietary FN Cold Hammer Forged Steel
-Gas System: Mid-Length
-Handguard: 13.65″ 6061 aluminum
-Muzzle Threads: 1/2×28

12.5 inch, 6mm ARC Caliber Specific:

-Elite Blackout Cerakote
-D.Wilson MFG/HDSI 12.5″ Mid-length gas 416R SS 6mm ARC
-HDSI 6mm ARC BCG
-Handguard: 11.5″ 6061 aluminum
-Muzzle Threads: 5/8×24

NFA DISCLAIMER/WARNING: The 11.5″, 12.5″ and 14.5″ (not Pin and Welded) do not meet the 16″ minimum barrel length requirement, and requires registration and a tax stamp with the Bureau of Alcohol, Tobacco, Firearms and Explosives (BATFE) when assembled into a complete rifle. Additional state and local restrictions may apply. It is the sole responsibility of the buyer to comply with any and all applicable laws.

UPS SHIPPING OPTIONS ONLY. No $7.95 Flat Rate for this item. This is to properly insure it.

Additional information

Caliber

5.56 NATO, 6mm ARC

Length

11.5, 12.5, 14.5, 16