Click to enlarge

Arisaka Defense Low Profile Bipod Mount (R)

The Arisaka Low Profile Bipod Mount replaces the stock sling swivel interface on Harris S-series swivel bipods with a minimalist Picatinny mount. Rotation limiters allow for approximately 15 degrees to either side for leveling, and the mount works fine with pod lock levers.

Compared to an aftermarket Picatinny-to-sling-swivel adapter and the stock sling swivel interface, the Low Profile Bipod Mount reduces the overall height, weight, and bulk of the bipod. This new version features a quick disconnect latch that allows the user to quickly install and remove the entire bipod from a Picatinny rail.

Installation/removal is done by loosening the canting adjustment, pulling the latch away from the Picatinny rail, and then sliding the mount (and bipod) on or off the rail. Once the bipod is positioned where you want it, release the latch, ensure it has seated in a slot in the rail, and then snug the canting adjustment back to your preferred tightness. Even a slight amount of tension on the canting adjustment will lock the latch in place, preventing it from moving.

Please note: There will be slight play between the bipod mount and rail. This is necessary due to variations in 3rd party manufacturers of rail sections and handguards, and ensures the bipod mount can be easily removed and installed. Any slack is taken up when the bipod is properly loaded, and has no negative effect on strength or accuracy.

The Low Profile Bipod Mount is compatible with Harris S-series swivel bipods including the S-BR, S-BRM, S-L, and S-LM.

If you have a KeyMod or M-Lok rail system the Arisaka Low Profile Picatinny Rails for KeyMod and M-Lok are a perfect match since they add very little additional height and use three mounting screws for maximum strength and durability.

Requires a 1/4" socket wrench for assembly (tools not included).

Specs:
Weight: 1.05 oz
Length: 1.4"
Width: 1.20"

Distance from swivel axis to Picatinny rail: 0.62" (bipod hangs approximately 1/8" below Picatinny rail)

The Low Profile Bipod Mount is CNC machined from 6061-T6 aluminum (base) and 7075-T6 aluminum (latch), and MIL-A-8625 Type III hard coat anodized.

Made in the USA.


Arisaka Defense Low Profile Bipod Mount (R)
140LPBM$45.00
25% OFF ALL ARC'TERYX!

Items marked "(R)" No Export, No Paypal, NO EXCEPTIONS



Contact Us:
Email: optactical@yahoo.com
Phone: 919 818-3649
Address: 2533 Atlantic Ave, Suite 103, Raleigh, NC 27604

Phone Hours: Monday-Friday, 8am - 4pm Eastern Standard Time (EST)
Walk-In Customers Welcome from 10am - 3pm!

Shipping:
$5 Standard Shipping to any US or APO/FPO Address!
UPS Shipping Options: Orders must be placed by 12pm EST to ensure they go out the same day.
Orders are not processed on the weekends.

International Rates, see the left margin tab marked "CONTACT / POLICIES"

Verified Service Disabled Veteran-Owned Small Business, we accept GPC Cards and Government Contracts
CAGE: 5MU18 / DUNS: 361562593 / SDVOSB: 253753